FOR MOUNTAIN AND ROAD BIKES
Squirt SEAL Tyre Sealant with BeadBlock® 120ml Easy-Fill pouch
Squirt SEAL Tyre Sealant with BeadBlock® is an ammonia-free latex solution which contains natural microfibres and BeadBlock™ particles. Together they form a permanent, reinforced rubber plug in punctures up to 6mm. It will not let sidewalls stick together and contains corrosion inhibitors. Suitable for use from -20 °C to 40 °C
Specifications
- 1 x 120ml easy-fill pouch
- Easy to clean
- Does not dry out quickly
- Contains natural fibres
- Prevents sidewalls from sticking together
- Contains BeadBlock™ Technology
- Environmentally safe & Ammonia free
- Seals punctures caused by objects up to 6mm in diameter
Directions for Application with BRAND NEW TYRE
- Deflate tyre
- Remove one side of the tyre from the rim
- Shake bottle well and remove tamper seal
- Immediately pour 120ml (or prescribed amount) into the tyre
- Unscrew cap from BeadBlock™ particle bottle
- Fill the BeadBlock™ particle bottle cap
- Pour 1 cap full of BeadBlock™ particles into the tyre
- Secure the tyre to the rim
- Rotate wheel until valve stem is at the top
- Inflate tyre to the correct pressure to seal bead and keep inflated to tyre manufacturer’s specification
Directions for Application with USED TYRE or EXISTING SEALANT
- Deflate tyre and remove from rim
- Remove old sealant and clean inside of tyre thoroughly if necessary
- Shake bottle well and remove tamper seal
- Immediately pour 120ml (or prescribed amount) into the tyre
- Unscrew cap from BeadBlock™ particle bottle
- Fill the BeadBlock™ particle bottle cap
- Pour 1 cap full of BeadBlock™ particles into the tyre
- Secure the tyre to the rim
- Rotate wheel until valve stem is at the top
- Inflate tyre to the correct pressure to seal bead and keep inflated to tyre manufacturer’s specification
Directions for Application THROUGH VALVE
- Make use of a Syringe Valve Sealant applicator
- Simply remove the valve core from the wheel
- Premix the BeadBlock™ particles and the Sealant in an applicator or bottle
- Shake the premix well
- Secure the applicators flexible tubing onto the nozzle and valve
- Squirt the desired amount (120ml) into the tyre
- Re-insert the valve core
- Rotate wheel until valve stem is at the top
- Inflate tyre to the correct pressure to seal bead and keep inflated to tyre manufacturer’s specification
Handling and Storage
- Avoid contact with eyes. Rinse with water. If eye irritation persists, consult a specialist
- Skin contact. Wash with soap and water
- Store in well ventilated area
- If swallowed or allergic reaction, seek medical advice if necessary
